Ultra thin 5*5/10*10 cm Hydrocolloid wound dressing

Product Name: Hydrocolloid Wound dressing

Model and Size: Thin border ，square shape 10cm×10cm

Intended use: The product is used for the care of wounds with no or slight exudate on the body surface, and for the coverage and care of non-chronic wounds.

Structure:The product consists of polyurethane (PU) film and hydrocolloid film, which includes sodium carboxymethyl cellulose and medical pressure-sensitive adhesive
(styrene-isoprene-styrene thermoplastic rubber). The ingredients that are not absorbed by the human body, along with release paper.

Contraindications

- Not recommended for wounds with severe infections, exposed bones and tendons, and excessive fluid leakage;
- Wounds with active bleeding must wait until the bleeding completely stops before use;
- Patients with known hypersensitivity to hydrocolloids are contraindicated. If allergic reactions or adverse reactions occur when using this product, please replace it promptly or seek medical attention.

Sterilization
Cobalt 60 irradiation sterilization.

Storage
Store in a well-ventilated clean room with relative humidity less than 80%，temperature 5℃ to 35℃ and no corrosive gas .

Directions for Use

- Rinse the wound with physiological saline and gently dry the skin around the wound.
- Tear off the protective paper, cover the adhesive side of the hydrocolloid dressing on the wound, and pay attention to using a dressing 1-2cm larger than the wound to cover the wound.
- Choose a hydrocolloid dressing suitable for the size of the wound. If there is no suitable wound size, the hydrocolloid dressing can be cut appropriately.
- When pasting, gently press the hydrocolloid dressing to fully adhere to the surrounding skin and prevent external bacteria from invading.
- Replace the hydrocolloid dressing in a timely manner based on the amount of wound exudation. Generally, it is replaced once every 1-3 days. For wounds with excessive fluid leakage and severe infection, the frequency of replacement should be increased. When the appearance of the hydrocolloid dressing is milky white and transparent, it is recommended to replace the dressing. If there is leakage, the dressing should be replaced immediately.